A Laptop’s RAM May Be Upgraded And Installed, But How?

Whether you’re using an older laptop or a modern system, increasing the amount of RAM in your system might help alleviate some of the sluggishness. Computers that lack physical memory must swap data to a hard disc or solid-state drive (SSD), an extremely sluggish procedure (even with the slowest of RAM chips). Although some new laptops do not allow you to access the RAM, many do.

You won’t have to spend a lot of money or time if you can update your laptop’s RAM. RAM upgrades typically cost between $ 25 and $55 depending on whether or not you need to replace a memory card or merely increase the amount of storage. And replacing the RAM chips should take no more than five to ten minutes, depending on how many screws you have to remove from the motherboard. This is how to upgrade your laptop’s RAM.

Most current laptops have enough RAM, but even the greatest Windows laptops might benefit from more RAM. More RAM implies that you’ll be able to do numerous jobs at once more efficiently, which will improve your workflow efficiency. Instead, you can choose to upgrade your laptop’s memory from the stock RAM to perform better.

Many laptop owners avoid upgrading the default RAM, although doing so might improve performance and extend the life of the notebook. You may, of course, do this yourself if you’re a little irresponsible and impatient, but upgrading RAM is a lot easier, and safer operation than most people assume.

If you have a laptop with soldered RAM, you won’t be able to replace or install new RAM in this procedure.

read more: Best RAM For Ryzen 5 3600

Easily expand the RAM capacity on your laptop.

  • On the other hand, you can safely replace the RAM in your laptop if you’re careful. To enhance the RAM on your laptop, adhere to these guidelines:
  • You’ll need a screwdriver to get the screws securing the laptop’s backplate off.
  • Pull the rubber feet away from the notebook to access and remove your laptop’s screws.
  • Use a small tool to pry open the laptop’s backplate so you can get inside. Work your way around the backplate from a starting place.
  • To access the laptop’s RAM, remove any metal plates or tape covering it and unscrew or pull a small section of it.
  • Look for clamps or metallic arms that hold the RAM in place on the RAM’s sides.
  • The RAM may be made available by gently pushing or unfastening these. When you do this, the RAM will partly come out in certain situations.
  • Pull the RAM out of the slot with care. To avoid damaging the RAM or laptop, try to pull at an angle instead of straight up.
  • The new RAM should be inserted into the slot gently. For the RAM to be installed, you must press the button until you hear an audible click. Steps 4-7 may be repeated if you need to change the laptop’s second RAM module.
  • Reinstall the RAM shield on your laptop if it has one.
  • Reattach the laptop’s backplate and push firmly. When the backplate is correctly fitted, you should hear an audible click, much as when installing RAM.

Check How Much RAM You’re Using First.

Low memory is a common source of computer bottlenecks, and it may result in both performance slowdowns and stability issues. If you’re a heavy multitasker or tend to have up to 30 browser windows open at a time, you’ll find that adding more RAM will make your system perform faster.

In Windows Task Manager, you can see how much RAM your laptop uses. To access the Task Manager, click on the taskbar and choose that option. Then, on Task Manager’s performance tab, look at how much RAM is being utilised from the total available.

Clicking on the “Open Resource Monitor” button at the bottom of the Task Manager window and then scrolling to the Memory tab will give you a more comprehensive picture. Windows 7 users should be aware that the displays may seem somewhat different (the screenshots below were taken on Windows 10).


Many laptops have sealed bottoms or memory soldered to the motherboard, making RAM upgrades impossible. Alternatively, the system may only acknowledge a certain amount of RAM. Try Crucial’s Memory Advisor tool to see whether you can update your RAM (opens in a new tab). After filling in your laptop’s brand and model, you should see a screen that displays the maximum amount of memory and the number of memory slots your laptop has.

Crucial also has a list of laptop memory modules that you may purchase. Similar DIMMs from other manufacturers are, of course, available. If you require DDR2, DDR3, or DDR4 RAM, note the specific speed next to the kind and type (ex, “DDR3 PC3-12800”).

read more: The Best RAM For Ryzen Processors

Open The Panel To Find Your Memory Banks.

Now that you have the extra memory you need, it’s time to update your laptop’s RAM. Turn off your laptop, disconnect the power adapter first, and restart your computer.

To access your laptop’s memory banks, open the bottom panel. Memory and other components may be accessed by unscrewing the whole back of the laptop, depending on your system.

To prevent electrostatic discharge, it is necessary to conduct a grounding procedure.

Contact any metal surface inside your PC first before you touch any component in your PC (e.g., the back of the hard drive or a metal connector for another component). Static electricity in your body may cause harm, so this is an excellent way to eliminate it.

If Required, Remove RAM.

You’ll need to remove the current DIMMs from the motherboard to replace your memory. Push the memory module’s lips apart to remove it. The memory module should be positioned to protrude from the motherboard at an angle.

Before removing it, please keep it in place by its edges and pull it out of the motherboard.

 Replace The Old Memory Module With The New One (S)

Then, with the gold sides facing down, put the replacement modules at a 45-degree angle into the open slots. Push the modules into position by applying uniform pressure to the tops of the modules with your fingertips. Firmly push the DIMM module back until it is inserted flat and level with the clamps securing it securely until you hear a click.

read moreBest RAM For Ryzen 5 2600


That concludes our discussion. Make that the new RAM has been installed by restarting your laptop and checking the System Information or Task Manager. It’s time to make use of your newfound memory.

Read more: