How to connect RGB Fans on a Motherboard

Connecting RGB fans to a motherboard involves several steps to ensure they work correctly and are controlled by the motherboard’s RGB software. Here’s a detailed explanation of the process: 


  • Check Compatibility: Ensure that your RGB fans are compatible with your motherboard’s RGB software. Most motherboards use either ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, or ASRock Polychrome Sync. 
  • Identify Headers: Locate the RGB headers on your motherboard. These are typically labeled as “RGB header,” “ARGB header,” or something similar. The headers are usually 4-pin (12V) or 3-pin (5V) connectors. 
  • Connect RGB Fans: Connect the RGB fans to the RGB headers on the motherboard. Match the arrow on the RGB connector to the 12V or 5V pin on the header. Ensure a secure connection. 
  • Connect Power: RGB fans often require both an RGB connection and a power connection. Connect the power cables of the fans to the appropriate connectors on the power supply unit (PSU). 
  • Install Software: Install the motherboard’s RGB software on your computer. This software allows you to control the RGB lighting effects of your fans. 
  • Configure RGB Lighting: Open the RGB software and configure the lighting effects for your RGB fans. You can usually choose from various colors, effects, and brightness levels. 
  • Test and Adjust: Test the RGB lighting to ensure it’s working correctly. Adjust the settings as needed to achieve the desired lighting effects. 
  • Cable Management: Securely route the cables to avoid interference with other components and ensure a clean look inside your PC case. 

By following these steps, you can successfully connect RGB fans to your motherboard and enjoy customizable RGB lighting effects for your PC. 

You can connect three types of RGB fans to a compatible motherboard. 


  • Users of 3-pin RGB connections
  • With 4-pin RGB connections, the fans are
  • In the absence of headers, a motherboard

You’ll need a few special tools to connect a 3- or 4-pin fan to a motherboard without headers. You don’t need an additional tool to connect a 3-pin or 4-pin fan. After you’ve read and understood the instructions, you’re well-equipped to proceed.

Fans That Use a 3-Pin RGB Connection

DC fans are also known as three-pin fans. These fans increase the noise level. Using voltage, these RGB fans are easier to operate and less costly to buy. You can connect 3-pin RGB fans to a 3-pin connection. 3Pin fan connections tend to be smaller than 4Pin fan connectors in size. The front of the gadget has three square-shaped holes, while the rear has three cables. The speed sensor pin is yellow, whereas the force pin is red. If your motherboard has a 3-pin fan header, the 3-pin fan should be connected to it. Whether you use a 3-pin or 4-pin configuration, the result will be the same. Press the power button before proceeding.

Use These Steps to Install 3-Pin RGB Fans

A specific case is needed. “


Before proceeding with installation, carefully review the instructions provided in the manual. It’s important to read the manual thoroughly, even for experienced users, as it often contains important information about namespaces and ports that can help you easily identify the RGB markers. To begin, remove the RGB fans from their mounting. Then, connect the RGB fans using the wires provided, ensuring a secure connection. You should connect the motherboard’s fan headers to the RGB fans, making sure to push down firmly to ensure the connection is secure. With the connections complete, you can now install the RGB fans. It’s important to ensure that the case fans are directed towards the front or rear of the case for optimal airflow. 


Connecting 4-pin RGB Fans


A PWM fan is similar to a 4-Pin RGB fan because it uses pulse-width modulation (PWM). The RPMs of these fans are extraordinary, making them more noticeable. 4-Pin fans are famous because they provide customers with greater control. They’re better than the other supporters since they don’t create much noise. You can connect 4-pin RGB fans to the Best Motherboard for Ryzen 5 3600 using four connections. These connections allow for seamless integration with the motherboard’s RGB software, enabling you to customize the lighting effects of your fans to suit your preferences. The front and rear have four square-shaped holes and four wires. They cannot be inserted into a three-link connection. 


Follow the Directions Below to Install 4-Pin RGB Fans.

A specific case is needed. “


Be careful to follow the instructions in the packaging guide as closely as possible. Don’t skip through the handbook, whether you’re a newbie or an expert. It is common practice among manufacturers to denote the location of ports and apertures. As a consequence, you can quickly identify the RGB symbol. That’s where it’s located, after all. The motherboard’s RGB fan header currently has a 4-pin RGB fan connection.


To ensure that the connection is secure, forcefully push down.


The RGB fan is currently being tinkered with. On the front or rear of a case, RGB fans may be installed to make the lights more apparent. Close the topic tightly after you’re finished.


Installation Directions for Connecting RGBFans to a Motherboard


It’s important to carefully follow the instructions provided in the packaging guide. Whether you’re a beginner or an expert, do not skip the handbook. Manufacturers typically indicate the location of ports and openings, making it easy to locate the RGB symbol. If your motherboard’s RGB fan header has a 4-pin RGB fan connection, you can connect the RGB fan using this connection. Ensure a secure connection by firmly pushing down on the connector. Once the RGB fan is connected, you can install it on the front or rear of the case to enhance the visibility of the lights.


Finally, securely close the case after you have finished installing the RGB fan. Instructions for connecting RGB fans to a motherboard .Connecting RGB fans to motherboards without headers is a unique process compared to the other two methods. It’s important to have all the necessary tools and equipment ready in one place for this type of connection. The RGB fan regulator includes a four-pin double reference and a force link. To connect RGB fans without headers to the motherboard, these are the steps you need to follow.


It’s time to open the case.


The 4-Pin double connection is required. Assuming your motherboard lacks a header, you’ll need to use this port. Right now, we are working on connecting the pin space of the RGB fan to the 4-pin double connector. Because of this, the RGB fan’s regulator may connect and integrate the other surplus finish through the space link.» The regulator has a tiny hole on the other end for powering the force link. As you can see, the power supply includes a different ending that is attached to the SATA cable especially. The SATA connection provides power to the RGB fan, ensuring it operates smoothly during peak hours of use. As of right now, all of the links have been established. Connect the fan’s cable to the case’s power supply. The topic must be appropriately closed.


Many Benefits Await RGB Fans


One of the biggest advantages of RGB fans is their ability to be attached directly to motherboards. When building a PC, RGB fans are essential components. These fans can help reduce temperatures by circulating air over the CPU, ensuring it stays cool during operation. Additionally, there are now remotely controllable RGB fans available in the market, providing users with greater flexibility and convenience in managing their PC’s lighting effects. 




  1. Ensure that your computer is turned on and running.
  2. Check the fan’s power connection to ensure it is securely plugged in.
  3. Verify that the fan blades are not obstructed and can spin freely.
  4. Check the fan settings in your computer’s BIOS or operating system to ensure it is configured correctly.
  5. If the fan is still not working, consider replacing it with a new one.


Things to Avoid at All Costs


To install your fan, follow our instructions.

  1. The fan should not be stored in a hot place. Avoid storing the fan near appliances that generate heat, such as heaters. 
  2. The impeller should not be filled with anything. 
  3. Please keep the cables and connections supplied by In Win as they are and do not alter them.  
  4. The fan should only be utilized in the case of the computer. 
  5. Avoid contact with liquids when using this product. 




Here, we went through the specifics of hooking up RGB fans to the motherboard, and we hope you found what you needed. RGB fans are essential for PC cooling as they offer an optimal cooling solution that helps prevent heat from building up and damaging your hardware. Proper cooling is important for maintaining the longevity and performance of your computer components. Connecting an RGB fan to the motherboard might be challenging for a rookie. This tutorial, on the other hand, will show you how to accomplish it in the most straightforward manner possible, including the most manageable steps to take.