How To Lower GPU Temperature

The problem is that most computers only have one fan, which can only do so much. You may think you’ve solved the problem by installing a second fan. The truth is, this won’t work. What’s needed is a way to lower the GPU temperature independently of your computer’s temperature and CPU temperature. Nothing is more frustrating than having a PC that overheats and crashes.

How to Reduce Graphics Processing Power A specific tool called Temp is used to track and control the graphics card’s temperature. It gives users a graphical interface that includes a wide range of options for setting up fans, controlling the card’s fan speed, and even using custom scripts. It’s an innovative way to lower heat and maintain graphics card performance.

If you care about your computer’s performance, then you should pay attention to its temperature. The GPU is one of the most important components of your computer. It generates a lot of heat, can slow down your system, and cause crashes. However, it is also one of the most important components. The key to keeping your GPU cool is ensuring it has plenty of airflows.

Read More How To Remove GPU From Motherboard

The nine stages to lowering GPU temperature are listed here.

1:Cleaning The GPU

The first and most apparent step is to clean up the GPU, and we will begin by wiping the dust off of the GPU from both the exterior and the interior of the computer.

Opening The Case

To begin your cleaning procedure, begin with the simplest visible action possible. After you’ve opened the case, be sure to examine every corner to see whether it needs any kind of cleaning.

Removing The GPU And Fans

Following that, you will need to remove the graphics card and the fans in order to have more access to the affected regions and clean them. Make sure to thoroughly remove all of the components; we don’t want any type of messy situation here.

Cleaning The Dust

Each of the fans and the GPU will have its own set of little locations that you won’t be able to reach without a compressor, and it will be necessary to use the air pressure to clean these areas. But first, use a cotton swab and clear out any little holes or rough places that have formed.

Putting The Pc Back Together

Now, reassemble everything correctly and check to see whether the problem has been resolved. Dust is a typical source of overheating, and it is usually the result of this. Don’t be concerned if it didn’t resolve your problem.

2: Replace Thermal Paste

This problem might be difficult to detect since there are no visible indicators of the problem prior to removing the GPU from the card. If the last step didn’t work out for you, you should consider changing the thermal paste since it may help your GPU in a variety of ways, one of which is improving the overall lifetime of your card.

  • Take out the GPU
  • Unscrew the heatsink
  • Cleaning the thermal paste
  • Apply a new one

Read More How To Reduce The Temperature Of Your GPU?

3: Lower In-Game Graphics Settings

Lowering the in-game settings is another thing you can do to keep your GPU temperatures under control, and this will provide a better outcome. It’s possible that you’ve just jumped into a new game and your GPU has begun to spew flames, in which case you may want to have a look at the game’s in-game options. Also, test the GPU performance on a variety of games and note any differences. If your GPU’s temperature rises solely in one game, you may simply drop the in-game graphical settings to reduce the temperature spike. Make careful to verify your GPU performance on online review sites to see whether they get the same result on the exact game as you do or if they get a different result. If you answered yes, you are in a safe zone.

4: Improve Air-Flow In The PC Case

Improving the ventilation conditions for your graphics card can improve its performance while also lowering its operating temperatures dramatically. And, for the most part, inadequate ventilation is to blame for the extreme temperature spikes experienced by the GPU. Make sure to adjust or redesign the fan positions within the PC case – this will considerably enhance airflow and allow the computer to run cooler. More importantly, it may be the best time for you to increase or decrease the number of fans in your room since too many fans may result in the air not being able to move effectively, and too few fans cannot adequately give the optimal airflow.

5. Replace The PC Case

Furthermore, you might get a new case that has more space than your existing one, and be certain that the case has more fans as well as more space. Install your GPU in the new case, run some tests, and see what happens.

Read More How to clean GPU in simple steps

6: Update Drivers

The next step is to update the drivers. This is a simple software technique. This is because GPU manufacturers are always fine-tuning and updating the algorithms and methods that guide how the card should operate. The regular upgrades to the drivers increase the efficiency of your GPU.

7: Underclocking The GPU

If you like overclocking, this might be the root cause of the excessive GPU temperatures. And if you’ve noticed excessive temperatures after overclocking, you’ll want to go back to the pre-overclocking settings.

8: Increase The Fan Speed

To ensure that the fans are being used to their full potential, you can use third-party software such as MSI Afterburner to check if the fan is running at full capacity during a stressful period; if not, you can use the input fan control utilities to simply adjust the fan speed when the GPU core reaches a certain temperature.

9: If Everything Fails

The last but not least step would be to just invest in a competent water-cooling system since they are the ideal alternative for anybody who enjoys overclocking GPUs. If you have a stock cooler or a generic fan, this is most likely the cause of excessive GPU temperatures. Because of their superior thermal performance, we suggest investing in liquid cooling.