How To Upgrade RAM On Laptop

The random-access memory (RAM) of your laptop is an essential component. Even while the amount of random-access memory (RAM) that comes standard with your laptop is sufficient for the first few years of use, the majority of us will probably need extra processing capability within the next couple of years. Of course, there are a lot of other factors at play here, such as often occurring OS upgrades and software that has a higher memory need. The majority of these issues are likely to be fixed by adding additional RAM to your laptop, which is now running slowly. Following these instructions will allow you to upgrade your RAM at a minimal cost and without leaving the comfort of your own home. Just keep in mind that if your laptop’s warranty is still valid, increasing the RAM or opening the laptop might invalidate the warranty and potentially cause harm to the device. Proceed at your own peril.

Increasing the amount of random-access memory (RAM) in your laptop is one of the simplest and quickest methods to boost its overall performance. We are going to walk you through the process of upgrading your RAM and show you precisely which kind of RAM is compatible with your laptop. However, even if it cannot be upgraded in the first place, we will assist you in determining whether or not it is possible to do so in the future. RAM that can be swapped out for newer versions is much simpler to replace. So, let’s plunge in.

read more: Best RAM For Ryzen 5 3600

You could also hear it referred to as physical memory or just memory in general. RAM, an acronym for Random Access Memory, is used. Your computer’s operating system stores information temporarily about processes and activities that are executing in the random-access memory (RAM). When there is more RAM available, a greater number of processes may operate in parallel.

If your RAM is already at capacity, you may have speed difficulties since your operating system will need to find another location to store the excess data. In order to make more memory available for working copies of processes and tasks, the operating system will begin to write information about inactive processes and tasks, known as surplus data, to the local hard disk (virtual memory). When the user returns to a previously paused process or activity, the system has to first clear out some of the RAM, then get the data of the requested item from the hard drive, then load it into the RAM. The user suffers lag because the read and write speeds of the hard drive are much slower than the read and write rates of the RAM.

If you find that your laptop regularly freezes up whenever you try to transition from one application to another, increasing the amount of RAM in your laptop will almost certainly make a major difference in the performance of your system. This latency has become considerably less of a concern as a direct result of the proliferation of solid-state disks (SSDs). In addition, although boosting your RAM is one of the most straightforward methods to eliminate lag, switching your system drive from a hard disk drive (HDD) to a solid-state drive (SSD) can also improve the speed of your laptop.

read more: The Best RAM For Ryzen Processors

How To Upgrade RAM On A Laptop

Find the RAM slot inside of your computer and arrange the new RAM module so that it will fit into place. This will allow you to update or add fresh RAM to your laptop. After that, apply some light pressure to the RAM cartridge and continue to do so until you hear a click that indicates the module has been successfully secured into the RAM clips located within your laptop.

Be aware that the RAM modules of certain laptops are soldered directly into the motherboard; thus, before going any further, you should determine whether or not you are able to do the update on your own.

  1. Turn off the power to your laptop, shut the lid, and wait for it to totally cool down before using it again.
  2. In the interim, disconnect all of the wires, cables, and other components.
  3. On a solid, level surface, invert your laptop so that the screen is facing down.
  4. Either unscrew and remove the bottom case of your laptop or open up the piece that is housing your RAM, depending on the make and type of your computer.
  5. By contacting an unpainted metal surface to ground oneself, you may protect delicate internal components from the harmful effects of static discharge.
  6. You may get rid of the memory modules you already have by gently pushing the clips that are keeping them in place out of the way. After the RAM module has partly dislodged from its slot, you may remove it entirely by pulling it out of the slot.
  7. When installing your new RAM, take care not to touch the gold connections that are located on the top of the module. Instead, line the module with the slot, and then push down hard on the module until it locks into place.
  8. As soon as all of the new modules have been inserted, you should refasten the RAM access panel or the bottom casing, and then flip your laptop over so that the correct side is facing up before reconnecting any connections or cords.

After you have finished, you should restart your computer to ensure that the new RAM is recognized by your operating system. This may be accomplished by using the Task Manager, as will be shown in the next section, or by opening the Control Panel, choosing System and Security, and selecting System to see the settings for your device. Both methods are discussed below. If the quantity of memory that is shown in the Control Panel is the same as the amount of RAM that you installed, then the upgrade that you performed was successful.

read moreBest RAM For Ryzen 5 2600

Read more: