If you’ve never replaced a computer’s motherboard before, you’ll need a lot of patience and physical exertion. During the process of removing and reinstalling the motherboard, you might stumble across any number of little obstacles. However, fear not! The procedure will go as smoothly as possible for you.
Start with why you’d want to replace your motherboard in the first place. Installing a motherboard in a new PC (if you’re searching for instructions on how to do it, please read down a bit.)
Components may fail at any moment. The same is true for motherboards. I’ve encountered many motherboards damaged by poor BIOS flashing and inadequate power supply. Things happen, and occasionally they might cause irreparable harm to your motherboard. Fortunately, there are ways to prevent this from happening.
However, replacing a motherboard takes a lot of time and effort. Before you begin, you must be certain that your motherboard has been damaged somehow. The first step is to use one of these helpful flow charts for motherboard troubleshooting. The only way to know whether your motherboard is dead is to get a new one. A motherboard has been completely constructed and ready to use inside a computer.
Read More: How To Check Motherboard In Windows 10
A Buyer’s Guide To New Motherboard Features
Although there are numerous motherboard manufacturers, there are only two CPU manufacturers. Intel or AMD processors are at the heart of your PC; therefore, you need to choose a motherboard that is compatible with your processor.
Next, check to see whether the motherboard you choose is compatible with the CPU you now have (or plan to get in the future). Both businesses offer a variety of sockets for their chips to fit into. For example, if you own an AMD APU, you’ll need a motherboard with a Socket FM2+. The socket type of your CPU is found on Google. Therefore search for motherboards designed around that socket type.
The Socket On Your Motherboard Must Be Compatible With Your CPU.
Now that you know which motherboards work with your CPU, the next thing to consider is the size of the board itself. In this instance, the size of your computer case will play a major role. At first glance, most cases are built for ATX motherboards; however, some can accommodate smaller mATX motherboards, while others can accommodate even smaller ITX motherboards. Only look for motherboards that will fit in your computer’s casing while doing your motherboard search.
The next step is to choose a motherboard brand. Nowadays, there are more similarities than differences across motherboards. You shouldn’t expect to observe substantial changes in performance, power consumption, or overclocking across motherboards from the same manufacturer that is priced similarly. Color schemes, I/O capabilities, and expansion slot layouts are the only things that differentiate them.
There will always be a degree of subjectivity involved in deciding which motherboard color scheme is best for your computer. There is nothing we can do for you. However, you must ensure that the motherboard you choose has enough USB, ethernet, and other connections to accommodate your requirements. In addition, your motherboard should have enough expansion slots to handle any graphics cards or other components you want to add.
After all, the only thing left to discuss is the cost. At about $80, you can obtain a decent, albeit austere, motherboard, but you can get far better motherboards for your money up to approximately $250. Prices for similar-featured motherboards from various manufacturers are often no more than ten dollars apart. Open-box (returned) motherboards may be a terrific way to save money on a new one, but they come with little risk.
Installing A New Motherboard On A Computer Is A Simple Process.
It’s time to install your new motherboard now that you’ve chosen one and have it in your hands. However, before we go into it, let’s first go through how to remove your old motherboard.
Shut down your computer and remove any wires or cords linked to it before opening the casing to access the motherboard. Here, you may snap a photo of everything that has to be connected before you begin dismantling.
You may first remove your motherboard’s larger components, like graphics cards and Wi-Fi cards. Consider using SATA or other interface cables to connect your SSD or HDD to your motherboard.
Finally, it’s time to remove all of your motherboard’s power wiring. At the top of most motherboards, you’ll find an 8-pin CPU power connection and a 24-pin ATX power connector towards the center of the motherboard’s left-hand side. Both of these connections must be unplugged.
Power Connection On A Motherboard’s 8-Pin.
Remove the screws securing the old motherboard to the mounting points in your PC’s casing using your preferred Phillips-head screwdriver. You should be able to remove your motherboard from your casing now that it’s free. As soon as the previous motherboard is no longer in use, you may begin removing the components from it. This includes the CPU cooler, CPU, and memory modules. There’s a danger here! Don’t risk damaging your expensive equipment by trying to do too much at once.
The CPU cooler is removed from the processor, and the processor is opened up for inspection. It’s time to install your new motherboard on your PC after that’s done. Everything you removed from your previous motherboard is replaced. That photo you shot previously might come in helpful now.
Your motherboard’s I/O shield is inserted into the back of your case before you install the motherboard into your empty claim.
Make sure you utilize the standoff screws on your motherboard to keep it away from the case wall. When you turn on your PC and don’t have your standoffs in place, you risk damaging the motherboard. There may be elevated mounting points pre-installed in particular computer casings.
Your old motherboard’s screws are used to secure the new model. Make sure you reattach the 24-pin and 8-pin power connections you removed previously. SATA cables are plugged in, and expansion cards are slotted back. Your computer’s internal links are checked to ensure they are properly connected and situated. Get your PC back together by reconnecting all of the attached external cords before you dismantle and reinstall the software.
Read More: Best Motherboards For i5 10600k
A Dead Motherboard In A PC Enclosure.
The stakes couldn’t be higher. As the motherboard adapts to its new life, your PC may reboot a few times. After that, everything should be back to its regular self. You should contact the maker of your motherboard or seek advice on one of the numerous computer-building forums on the Internet if you have difficulty getting your computer to start after replacing your motherboard.
You may expect your PC to run as smoothly as new with a new motherboard, and it may even look better.